Formatting Printer Settings to Banner 90 cm size Epson T3100x printer


It is important that your printer is set optimally in order to get the best print quality and longest durability.

Always use original Epson consumables. If you buy them from us, you are sure of the quality.

Always use the printer driver that includes PCL support for labels, signs, and banners.


We recommend the following settings for your Epson T3100x printers:

Size: 297 x 900 mm

Source: Roll Paper

Outdata: 297 x 900 mm

Weight: Singlewaite MAtte or Printer settings


Follow these steps on how to set up 297 x 900 mm banner size for your Epson printer:

  1. On Windows Start, search for “Settings” and go the “Settings” > “Devices”
  2. Go to “Printers & scanners” (“Skrivere og skannere”)

  1. Find your printer / printer driver (EPSON SC-T3100x Series) and click it to open manage (“administrere”) options . In this example, my printer's name is an “EPSON Banner 90 cm”.

  1. (Optional) You can change the printer name to know immediately what printers you are working on. From my printer “EPSON Banner 90cm”, click “Printer properties” (“Skriveregenskaper”), under the “General” tab change the name of your printer, then click “OK”.

  1. Go back to “Printer & scanners” settings, as you can see the printer you renamed and click the printer.
  2. Go to “Printing preferences” (“Utskriftsinnstillinger”) to set the paper size for your printer

  1. To set the 297 x 900 mm paper size setting (“Document Size”), Firstly, click to “Custom Paper Size…” then input the “Paper Size Name”, “Paper Width”, and “Paper Height” > hit “OK” Next step, go to “Settings…” > “Document Size” > “User Defined” > “Banner 297 x 900 mm”, and set the “Orientation” (“Orientering”) to “Portrait” (“Portrett”) or “Landscape” (“Landskap”) then click “OK”

  1. Set the “Size” ("Papirstorrelese"), “Source” ("Papirkilde"), “Outdata” ("Utdatapapir"), and “Weight” ("Papirtype") of media for printing to use on the printer. After you set the printer settings that you want and hit “OK”

  1. To set the “Print Quality”, unclick the “Simple Setting”, select “ICM”. And the “Level” must be “Quality” and hit “OK”

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us