Formatting Printer Settings to 120 x 880 mm size for Norco Topp Epson T3100x printer

It is important that your printer is set optimally in order to get the best print quality and longest durability.

Always use original Epson consumables. If you buy them from us, you are sure of the quality.

Always use the printer driver that includes PCL support for labels, signs, and banners.

We recommend the following settings for your Epson T3100x printers:

Size: 120 x 880 mm

Source: Roll Paper

Outdata: 120 x 880 mm

Weight: Singlewaite MAtte or Printer settings

Follow these steps on how to set up 120 x 880 mm banner size for your Epson printer:

Find your printer / printer driver (EPSON SC-T3100x Series) and click it to open manage (“administrere”) options. In this example, my printer's name is an “EPSON Norco Topp”.

(Optional) You can change the printer name to know immediately what printers you are working on. From my printer “EPSON Norco Topp”, click “Printer properties” (“Skriveregenskaper”), under the “General” tab change the name of your printer, then click “OK”.

Go back to “Printer & scanners” settings, as you can see the printer you renamed and click the printer.
Go to “Printing preferences” (“Utskriftsinnstillinger”) to set the paper size for your printer

To set the 120 x 880 mm paper size setting (“Document Size”), Firstly, click to “Custom Paper Size…” then input the “Paper Size Name”, “Paper Width”, and “Paper Height” > hit “OK”. Next step, go to “Settings…” > “Document Size” > “User Defined” > “Norco Topp 120 x 880 mm”, and set the “Orientation” (“Orientering”) to “Portrait” (“Portrett”) or “Landscape” (“Landskap”) then click “OK”

Set the “Size” ("Papirstorrelese"), “Source” ("Papirkilde"), “Outdata” ("Utdatapapir"), and “Weight” ("Papirtype") of media for printing to use on the printer. After you set the printer settings that you want and hit “OK”

To set the “Print Quality”, unclick the “Simple Setting”, select “ICM”. And the “Level” must be “Quality” and hit “OK”